¶ Overview
This document guides you through the processes of downloading and running this release package.
¶ Hardware Requirements
The hardware requirements for using this release package are as follows:
Supported boards:
- cool pi cm5 evb (8G+64GB)
¶ Working with cool pi cm5 evb
¶ board hardware
The figure below shows the different components of the cm5 evb board.
power input DC 12V/2A
(type-c power input not support pd)
¶ board images
The table below describes the locations of the software images in onedrive or 百度网盘
| image name | path | download tool |
|---|---|---|
| RKDevTool_Release_v2.92_CM5-EVB_loader0414.zip | loader/CM5-EVB | windows RKDevTool（need install DriverAssitant_v5.12.zip prefer） |
| Cool Pi CM5 Ubuntu22 20230306 System Install.iso | udisk install/CM5 EVB | windows rufus-3.21.exe |
rk3588_coolpicm5_out_custom0908.zip
¶ flashing board images
The board images can be flashed to the target spi flash and emmc by using the RKDevTool and balenaEtcher. User can also install the system through a installation u disk with rufus tool.
¶ install loader
In general, user do not have to upgrade the default loader.
Uncompress file RKDevTool_Release_v2.92_CM5-EVB_loader0414.zip.
Note:
The windows system need install usb driver with RKDevTool.
¶ install system
¶ use balenaEtcher with eMMC online (Recommend)
Plug in the power and press the power button at least three times, and the machine will enter UMS mode.
¶ use rufus with USB-disk (Recommend)
Download system iso file, then run the tool that makes the boot USB stick.
Insert the USB stick into the blue USB3.0 port (the lower one) of cm5 evb board, then power up and wait for automatic installation to complete. User can view installation status via serial port or hdmi out display.